SSI/LabAlliance will be on hand to exhibit some of our latest products, provide detailed product information and answer your questions.
You will find us at Booth 2570 in the center of the expo floor between “Technology Park” and the Exposition Management Offices.

Convention Center Floor:

Close-up:

Visit the Pittcon 2012 Website for more information or view our Pittcon Exhibitor Details here.

Product Improvement: Self-Flush Assembly

In order to improve the functionality, aesthetics and installation ease of SSI pumps, the use of hose barbs and Tygon tubing for connecting the self flush tubing has been replaced by ¼ x 28 inch fittings and 1/8” PTFE tubing. See Figure 1.

Fig. 1: New SF showing smaller tubing versus old system with hose barbs.

In addition on all multi piston pumps the self flush housings are daisy chained to allow for only one inlet and outlet line. See Figure 2.

Fig. 2: Daisy chaining the SF heads on dual piston pumps.

On Series 1 Pumps, the spacer plate behind the self flush has been changed from aluminum to SS to avoid corrosion. See Figure 3.

Fig. 3: Spacer behind SF on Series I Pump showing finish of SS used.

All of these features add to the reliability and ease of maintenance on the pumps. Additionally they have a much more pleasing aesthetic look.

Product Improvement: Prep 24 Pump Replaced by Prep 36 Pump

The prep 24 pump is being replaced to more closely match the requirements for semi prep columns in the 3/8” and ½” size range. The new prep 36 pump has the same specifications as the old prep 24 with the following added benefits:

• 50% higher flow rate allowing full potential of 10mm and ½” columns
• Much quieter operation of the pump
• Lower weight
• Same price as the Prep 24
• Includes the improved self flush plumbing

Click on the Prep 36 Part Numbers below to view specifications and download datasheet.

Material:
Stainless Steel — Prep 24 Pump, part # P10SFT01 REPLACED BY Prep 36 Pump, Part # P15SFT01

PEEK — Prep 24 Pump, part # P10PFT01 REPLACED BY Prep 36 Pump, Part # P15PFT01

LC2 Low Cost Systems

The LC2 is a complete, yet compact, Binary Gradient System with flow rates of up to 5mL/min or 10 mL/min and pressures up to 6,000 psi. It has a small foot print so it is just as easy on your bench space as it is on your budget.

Available with a Stainless Steel fluid path or a metal-free, bio-compatible PEEK fluid path. For analytical or small-scale prep, the LC2 System delivers a lot of chromatographic performance for a great price.

Click to view Systems